Center Stand Turntables

"Using your product I'm able to drive my
BMW 1200 LT up to the front door, turn it around,
and then back it in using the reverse gear."

Claude Williams, PE

Frequently Asked Questions

How do I use my TAB-ST?

Place your TAB ST directly under the motorcycle. Lower the bike's center stand so it rests in the center of the turntable's top plate. Press down on the rear of the motorcycle so it is balanced on the center stand and both wheels are clear of the floor. Gently rotate the motorcycle until it points in the direction you want.

Instructions are also posted on this website and detailed instructions are included in the package.

Will the TAB ST work with my Honda Gold Wing?

Absolutely, the TAB ST was designed for use with heavy cruiser style motorcycles. It easily handles 1,000 pounds, so even motorcycles fully loaded with saddlebags and other accessories can be used on the TAB ST. You just need a bike with a center stand.

Which side of my TAB ST is the top?

The printed surface is the top of your TAB ST motorcycle turntable.

My bike only has a side stand. Can I use the TAB ST?

No, the TAB ST is only useable with a center stand support.

Can I leave my bike parked on my TAB ST?

Yes, the stainless steel top permits long term loading without damage.

Can I use my TAB ST on a sloped driveway?

No, the surface must be nearly flat (horizontal), or your bike may tip over as you rotate it.

Can I use my TAB ST in any weather.

The TAB ST is weatherproof, however rain on gravel or dirt surfaces may create mud that is slippery or may contaminate the turntable. We would not recommend using the TAB ST on ice, snow or hail due to the greater risk on slippery surfaces.

Is the TAB ST portable?

Yes, the thin profile and robust construction are favorable for taking your TAB ST with you. It is also ideal for use with multiple motorcycles when you want to park each bike in a different place in the garage. Store the TAB ST out of the way on a shelf in your garage when not in use.

Do I need to lubricate my TAB ST?

No, your TAB ST turntable does not require lubrication.

Can I clean mud out of my TAB ST?

Yes, gently open one side of the TAB ST and rinse with clean water.

I pulled my TAB ST apart, how do I reassemble it?

• Be certain the parts are clean — remove any grit or dirt.
• Put the center pivot through both disks with the flange on top. (Insert it though the stainless disk first.)
• Finally, put one half of the rivet in from the top and the other piece from the bottom and press sides together.
• In case you need them, replacements for the center pivot were included when we shipped your TAB ST.

What do I do with the white paper in the box with my TAB ST?

Throw it away or put it in the recycle with the cardboard box. It is part of the packing material used to protect the printing on the top rubber pad during shipping.