FAQs

TAB ST FAQs

• How do I use my TAB-ST?
• Will the TAB ST work with my Honda Gold Wing?
• Which side of my TAB ST is the top?
• My bike only has a side stand. Can I use the TAB ST?
• Can I leave my bike parked on my TAB ST?
• Can I use my TAB ST on a sloped driveway?
• Can I use my TAB ST in any weather?
• Is the TAB ST portable?
• Do I need to lubricate my TAB ST?
• Can I clean mud out of my TAB ST?
• I pulled my TAB ST apart, how do I reassemble it?
• What do I do with the white paper in the box with my TAB ST?

SIDEWINDER FAQs

• How do I arrange the wheel and kickstand pans on the extension bar of my SIDEWINDER?
• What are the engraved circles on the kickstand pan on my SIDEWINDER I?
• Can I ride my bike onto and off of the Sidewinder?
• SIDEWINDER: My bike is too long to position the stops outside the front and rear wheels. How do I keep it positioned?

How do I use my TAB-ST?

Place your TAB ST directly under the motorcycle. Lower the bike’s center stand so it rests in the center of the turntable’s top plate. Press down on the rear of the motorcycle so it is balanced on the center stand and both wheels are clear of the floor. Gently rotate the motorcycle until it points in the direction you want.

Instructions are also posted on this website and detailed instructions are included in the package.[ Back to Top ]

Will the TAB ST work with my Honda Gold Wing?

Absolutely, the TAB ST was designed for use with heavy cruiser style motorcycles. It easily handles 1,000 pounds, so even motorcycles fully loaded with saddlebags and other accessories can be used on the TAB ST. You just need a bike with a center stand. [ Back to Top ]

Which side of my TAB ST is the top?

The printed surface is the top of your TAB ST motorcycle turntable.[ Back to Top ]

My bike only has a side stand. Can I use the TAB ST?

No, the TAB ST is only useable with a center stand support.  See the SIDEWINDER - side stand dolly also on this website.  Click on Side Stand button.[ Back to Top ]

Can I leave my bike parked on my TAB ST?

Yes, the stainless steel top permits long term loading without damage.[ Back to Top ]

Can I use my TAB ST on a sloped driveway?

No, the surface must be nearly flat (horizontal), or your bike may tip over as you rotate it.
[ Back to Top ]

Can I use my TAB ST in any weather.

The TAB ST is weatherproof, however rain on gravel or dirt surfaces may create mud that is slippery or may contaminate the turntable. We would not recommend using the TAB ST on ice, snow or hail due to the greater risk on slippery surfaces.[ Back to Top ]

Is the TAB ST portable?

Yes, the thin profile and robust construction are favorable for taking your TAB ST with you. It is also ideal for use with multiple motorcycles when you want to park each bike in a different place in the garage. Store the TAB ST out of the way on a shelf in your garage when not in use.[ Back to Top ]

Do I need to lubricate my TAB ST?

No, your TAB ST turntable does not require lubrication.[ Back to Top ]

Can I clean mud out of my TAB ST?

Yes, gently open one side of the TAB ST and rinse with clean water.[ Back to Top ]

I pulled my TAB ST apart, how do I reassemble it?

• Be certain the parts are clean — remove any grit or dirt.
• Put the center pivot through both disks with the flange on top (Insert it though the stainless disk first).
• Finally, put one half of the rivet in from the top and the other piece from the bottom and press sides together.
• In case you need them, replacements for the center pivot are available; contact us at sales@turnabike.com

[ Back to Top ]

What do I do with the white paper in the box with my TAB ST?

Throw it away or put it in the recycle with the cardboard box. It is part of the packing material used to protect the printing on the top rubber pad during shipping.[ Back to Top ]

How do I arrange the wheel and kickstand pans on the extension bar of my SIDEWINDER I?

Wheel pans go on one side of the extension bar and the Kickstand pan may be placed either on the same or opposite side. Bikes with higher ground clearence generally prefer to use opposite side configuration, while same side mounting provides a generally more compact configuration where space is limited.[ Back to Top ]

What are the engraved circles on the kickstand pan on my SIDEWINDER I?

That is your kickstand target. Idealy mounting and positioning will have the contact pad of the kickstand in the target area.[ Back to Top ]

Can I ride my bike onto and off of the Sidewinder?

We do not recommend that, but if you are setup with the kickstand pan opposite the wheels it is possible. Be certain the wheel pan casters are all locked when loading and unloading. Be certain the stop bars are retracted to permit rolling off the SIDEWINDER.[ Back to Top ]

SIDEWINDER: My bike is too long to position the stops outside the front and rear wheels. How do I keep it positioned?

Move them to stop a single tire (front tire or rear tire) only.[ Back to Top ]